How to Add a Cisco 303G to Nextiva Account

Adding a Cisco 303G:

1. Visit nextiva.com, and click Client Login to log in to NextOS.
2. From the NextOS Home Page, select Voice. 
3. From the Nextiva Voice Admin Dashboard, click the Add link under the Devices tile. 
   Adding Devices
    
4. Select the Own device radio button at the top of the screen (Figure 1-2).
   Own Device
5. Select the Cisco 303G from the drop-down list and enter the MAC address. 
   Model and MAC Add
6. Click the blue Assign button toward the bottom of the screen. A pop-up message will confirm if the device was successfully provisioned (Figure 1-4). Once you see the confirmation message, the device has been added to your account. You can assign it to a user at a later time, or go on to step 7 to assign it now.
   Device Added
7. To assign the device to a user, select the user to whom the device will be assigned from the drop-down list below the blue Assign button (Figure 1-5).
   Adding a User
8. Click the green Finish button at the bottom of the screen. A pop-up message will appear confirming that the device was successfully assigned to the user (Figure 1-6).
   User Assignment Confirmation
9. Click the green Done button toward the to exit the screen.